{"title":"Dimmer Switches","description":"","products":[{"product_id":"lutron-09981","title":"Lutron 0-10 volt 8 amp Taupe Single-Pole \/ 3-Way Ballast \/ Driver Wall Dimmer Switch","description":"\u003cp\u003e0-10 volt - 8 amp - Taupe - Wall Switch - Ballast \/ Driver Compatible - Single-Pole \/ 3-Way - Diva | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~Control for 0-10 volt LED drivers and fluorescent ballasts\n\u003cbr\u003e~Connects directly to the line voltage to switch on\/off, so a power pack is not needed\n\u003cbr\u003e~Cannot be used with a wired occupancy sensor\n\u003cbr\u003e@Troubleshooting\n\u003cbr\u003e~Problem: Lights do not dim or remain at low light level\n\u003cbr\u003e~Remove the 0-10 volt (violet\/gray) leads from the control. Lights should go to 100%. If not, check the fixture wiring. Touch the violet\/gray wires together on the ballast\/driver and lights should dim down to low end. If not, follow troubleshooting steps from the ballast\/driver manufacturer\n\u003cbr\u003e~Problem: Light drops out when dimming or turns on to brightest level before reaching the highest level on the dimmer\n\u003cbr\u003e~Adjust low-end or high-end trim according to Installation Instructions\n\u003cbr\u003e~Problem: Lights do not turn on\n\u003cbr\u003e~Make sure ballast\/driver goes through the switch and is not fed with a constant hot feed\u003c\/p\u003e\n\n\u003cp\u003eDVSCSTV-TP\n\u003cbr\u003eDVSCSTV-TP DIVA 0-10 W\/SWITCHING BOX TAUPE\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47270907478208,"sku":"LX09981","price":86.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LX09981lg.jpg?v=1772247909"},{"product_id":"lutron-08296","title":"Lutron 120 volt Snow 8 amp Single-Pole \/ 3-Way Digital Wall Dimmer Switch","description":"\u003cp\u003e120 volt - 8 amp - Snow - Wall Switch - Digital - Single-Pole \/ 3-Way - Maestro | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~Works with CFL and LED lighting\n\u003cbr\u003e~Neutral connection required\n\u003cbr\u003e~Can be installed without a ground connection\n\u003cbr\u003e@Troubleshooting\n\u003cbr\u003e~Problem: Lights do not turn on\n\u003cbr\u003e~Make sure bulbs have not burned out\n\u003cbr\u003e~Check switch is wired correctly (wires connected to black and brass screws may be reversed)\n\u003cbr\u003e~Ensure neutral wire is hooked up\n\u003cbr\u003e~If controlling a fan, ensure pull chain is in \"on\" position\n\u003cbr\u003e~Ensure Front Accessible Service Switch (FASS) is not pulled out\n\u003cbr\u003e~Problem: Companion switch does not work\n\u003cbr\u003e~Make sure the master switch is installed on the load side\n\u003cbr\u003e~Check that the wire connected to the blue screw on the master dimmer is the same wire connected to the blue screw on the companion dimmer\n\u003cbr\u003e~Problem: LED on dimmer glows dimly or blinks\n\u003cbr\u003e~The blue screw terminal is miswired or connected to the ground or neutral wire\n\u003cbr\u003e~Use one dimmer in a 3-way or 4-way application. In the other location use a companion dimmer, such as model MA-AS. Since they have a neutral wire connection, the master dimmer needs to be placed on the load side of the 3 or 4 way (place companion switches in remaining locations)\n\u003cbr\u003eMSC-S8AM-SW\n\u003cbr\u003eMSC-S8AM-SW MAESTRO SC 8 AMP SWITCH M-LOC SNOW\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47270910460096,"sku":"LU08296","price":46.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LU08296lg.jpg?v=1772247869"},{"product_id":"lutron-45456","title":"Lutron 120 volt Brown 2000 watt Single-Pole Incandescent \/ Halogen Wall Dimmer Switch","description":"\u003cp\u003e120 volt - 2000 watt - Brown - Wall Switch - Slide Dimmer - Incandescent \/ Halogen Compatible - Single-Pole - Nova T | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~Slide-to-off dimmer\n\u003cbr\u003e~Only works with incandescent and halogen bulbs\n\u003cbr\u003e~Can be installed without a ground connection\n\u003cbr\u003e~Requires a 2-gang back box\n\u003cbr\u003e@Troubleshooting\n\u003cbr\u003e~Problem: Lights flicker or do not turn off\n\u003cbr\u003e~Check the bulbs in use are incandescent or halogen\n\u003cbr\u003e~Press down a little further until slider clicks into off position\n\u003cbr\u003e~If being used in a 3-way application, make sure only one dimmer is on the circuit. A mechanical on\/off switch will need to be used in the other location\u003c\/p\u003e\n\n\u003cp\u003eNT-2000-BR\n\u003cbr\u003eNT-2000-BR NOVA T 2000 WATT INCANDESCENT BROWN\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47270910853312,"sku":"LU45456","price":284.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LU45456lg.jpg?v=1772247881"},{"product_id":"lutron-46473","title":"Lutron 120 volt Taupe Toggler 800 watt Single-Pole Incandescent \/ Halogen Wall Dimmer Switch","description":"\u003cp\u003e120 volt - 800 watt - Taupe - Wall Switch - Preset Dimmer - Magnetic Low Voltage - Incandescent \/ Halogen Compatible - Single-Pole - Toggler - Diva® | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~On \/ off switch\n\u003cbr\u003e~Slide dimmer\n\u003cbr\u003e~Magnetic low voltage dimmer\n\u003cbr\u003e~Control lights from one location\n\u003cbr\u003e~Only works with incandescent and halogen bulbs\n\u003cbr\u003e~Can be installed without a ground connection\n\u003cbr\u003e@Troubleshooting\n\u003cbr\u003e~Problem: Lights flicker or do not turn off\n\u003cbr\u003e~Check the bulbs in use are either incandescent or halogen\u003c\/p\u003e\n\n\u003cp\u003eDVSCLV-10P-TP\n\u003cbr\u003eDVSCLV-10P-TP DIVA SATIN COLOR 800W MLV TAUPE\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47270910886080,"sku":"LU46473","price":97.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LU46473lg.jpg?v=1772247882"},{"product_id":"lutron-75270","title":"Lutron 120 volt White Ballast \/ Driver Wall Dimmer Switch","description":"\u003cp\u003e120 volt - White - Wall Switch - Slide Dimmer - Ballast \/ Driver Compatible -  Nova T | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~On \/ off switch\n\u003cbr\u003e~Slide dimmer\n\u003cbr\u003e~0-10 volt dimmer\n\u003cbr\u003e~Can be used with a wired occupancy sensor\n\u003cbr\u003e@Troubleshooting\n\u003cbr\u003e~Problem: Lights do not dim or remain at low light level\n\u003cbr\u003e~Remove the 0-10 volt (violet\/gray) leads from the control. Lights should go to 100%. If not, check fixture wiring. Touch the violet\/gray wires together on the ballast or driver and lights should dim down to low end. If not, follow troubleshooting steps from the ballast\/driver manufacturer\n\u003cbr\u003e~Problem: Light turns on to brightest level before reaching the highest level on the dimmer\n\u003cbr\u003e~Adjust high-end trim\n\u003cbr\u003e~Requires a power pack (model PP-DV)\n\u003cbr\u003eNFTV-WH\n\u003cbr\u003eNFTV-WH NOVA FLUOR. 0-10V CONTROL WH\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47270912393408,"sku":"LU75270","price":107.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LU75270lg.jpg?v=1772247893"},{"product_id":"satco-lighting-91070","title":"Satco 500 watt Slide Black Floor Lamp Dimmer","description":"\u003cp\u003e500 watt - Slide - Black | Satco Floor Lamp Dimmer\n\u003cbr\u003eLighting Controls\u003c\/p\u003e\n\n\u003cp\u003e90-1070\n\u003cbr\u003eFLOOR LAMP DIMMER 500W-120V 4.3A BLACK  7'\u003c\/p\u003e","brand":"Satco","offers":[{"title":"Default Title","offer_id":47271025180864,"sku":"SA91070","price":34.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/SA91070lg.jpg?v=1772250409"},{"product_id":"satco-70579","title":"Satco 500W Floor Dimmer White Finish","description":"\u003cp\u003eWhite - 500 watt | Satco Floor Dimmer\n\u003cbr\u003eLighting Controls\u003c\/p\u003e\n\n\u003cp\u003eS70-579\n\u003cbr\u003e500W Floor Dimmer White Finish S70-579\u003c\/p\u003e","brand":"Satco","offers":[{"title":"Default Title","offer_id":47271100776640,"sku":"SA70579","price":39.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/SA70579lg.jpg?v=1772250234"},{"product_id":"satco-82705","title":"Satco Turn-knob Housing Full Range Table Lamp Dimmer Switch","description":"\u003cp\u003eBlack - Turn-knob - Phenolic Housing - Full Range | Satco Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~Black and Gold Knobs\n\u003cbr\u003e~Indoor use only\n\u003cbr\u003e80-2705\n\u003cbr\u003eLED PHENOLIC DIMMER W\/2 KNOBS 80-2705\u003c\/p\u003e","brand":"Satco","offers":[{"title":"Default Title","offer_id":47271106707648,"sku":"SA82705","price":13.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/SA82705lg.jpg?v=1772250338"},{"product_id":"satco-90436","title":"Satco White 200 Watt Hi-Low Dimmer","description":"\u003cp\u003eWhite - 200 Watt - Hi-Low | Satco Dimmer Switch\n\u003cbr\u003eLighting Controls\u003c\/p\u003e\n\n\u003cp\u003e~For 18\/2 SPT-2 200W-120V\n\u003cbr\u003e90-436\n\u003cbr\u003eWHITE HI LO DIMMER SPT-1 90-436\u003c\/p\u003e","brand":"Satco","offers":[{"title":"Default Title","offer_id":47271106838720,"sku":"SA90436","price":3.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/SA90436lg.jpg?v=1772250377"},{"product_id":"lutron-45010","title":"Lutron 277 volt 6 amp White Single-Pole \/ 3-Way 3-Wire Fluorescent Wall Dimmer Switch","description":"\u003cp\u003e277 volt - 6 amp - White - Wall Switch - Preset Dimmer - Fluorescent Compatible - Single-Pole \/ 3-Way - 3-Wire - Skylark | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~On \/ off switch\n\u003cbr\u003e~Preset slide dimmer\n\u003cbr\u003e~Neutral connection required\n\u003cbr\u003e@Troubleshooting\n\u003cbr\u003e~Problem: Light does not turn on\n\u003cbr\u003e~Make sure control is being used with a Lutron 3-wire ballast or driver\n\u003cbr\u003e~Problem: One location will not turn on if the other location is turned off\n\u003cbr\u003e~The common and traveler wires are switched at one of the locations. Consult the installation guide and wiring diagram for wiring guidelines in a 3-way setup. The common wire will be identified as the \"tagged\" wire. This wire either brings line voltage into the wallbox, or delivers voltage to your lights. Traveler wires go between 2 wallboxes and typically \"travel\" together in the wall. If the common and traveler wire are switched on the control, one side will only turn on if the other is in the on position.\n\u003cbr\u003e~Use one dimmer in a 3-way application. In the other location use a standard mechanical switch, such as model CA-3PS. Because this requires a neutral connection, dimmer must be placed on the load side of the 3-way\n\u003cbr\u003eSF-12P-277-3-WH\n\u003cbr\u003eSF-12P-277-3-WH SKYLARK FLUOR 277V 1-12LP 3WY WHITE\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271116538048,"sku":"LU45010","price":208.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LU45010lg.jpg?v=1772247878"},{"product_id":"lutron-14613","title":"Lutron Light Almond Dimmer Switch","description":"\u003cp\u003eSingle-Pole \/ 3-Way - Wireless - PRO Smart - Light Almond - Caseta | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\u003c\/p\u003e\n\n\u003cp\u003ePD-10NXD-LA\n\u003cbr\u003eCASETA WIRELESS IN-WALL DIMMER PRO - LIGHT ALMOND\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271178371264,"sku":"LU14613","price":132.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LU14613lg.jpg?v=1772247871"},{"product_id":"lutron-68801","title":"Lutron 120 volt 1000 watt 3 Way Preset Dimmer","description":"\u003cp\u003e120 volt - 1000 watt - White - Wall Switch - Single-Pole or 3-Way - Diva  | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~A simple and elegant solution designed to match your existing designer style switches and accessories. Easily turn the lights on and off with the large paddle switch. While the lights are on, use the sleek slide control to adjust the lights to your perfect level. The paddle switch returns the lights to your favorite level. Select models available with built-in soft glow locator light. There are also models available with the eco-dim® feature, which guarantees at least 15% energy savings compared to a standard switch.\u003c\/p\u003e\n\n\u003cp\u003eDV-103P-WH\n\u003cbr\u003eDV-103P-WH DIVA INC 1000W 3WAY WHITE\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271178666176,"sku":"LU68801","price":114.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LU68801lg.jpg?v=1772247892"},{"product_id":"lutron-00296","title":"Lutron 120 volt 150 watt CFL\/LED 600 Watt Incandescents\/Halogens Dimmer","description":"\u003cp\u003e120 volt - 600 Watt Incandescents\/Halogens - 150 watt CFL\/LED - White - 3 Way Switch - Wall Switch - CONTOUR INC - Skylark®  | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~Skylark Contour is the newest addition to the Skylark® slide dimmer family of products. It provides the same quality and performance as the original Skylark slide dimmer, but with an updated look. It features a convenient rocker switch that turns the lights on and off, and an easy-to-use slide control that adjusts the light for any activity\u003c\/p\u003e\n\n\u003cp\u003eCTCL-153P-WH\n\u003cbr\u003eCTCL-153P-WH CONTOUR CFL\/LED WHITE\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271201538240,"sku":"LU00296","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LU00296lg.jpg?v=1772247863"},{"product_id":"lutron-00307","title":"Lutron 120 volt Biscuit Toggler Single-Pole \/ 3-Way LED \/ Incandescent Wall Dimmer Switch","description":"\u003cp\u003e120 volt - Biscuit - Wall Switch - Preset Dimmer - LED \/ Incandescent Compatible - Single-Pole \/ 3-Way - Toggler - Diva® | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~On \/ off switch\n\u003cbr\u003e~Slide dimmer\n\u003cbr\u003e~Works with most LED, CFL, incandescent and halogen bulbs\n\u003cbr\u003e~Check Lutron's LED compatibility tool for specific bulb compatibility\n\u003cbr\u003e@Troubleshooting\n\u003cbr\u003e~Problem: CFLs or LEDs do not dim, have a poor dimming range, or they flicker\/flash\n\u003cbr\u003e~Check that 2 dimmers aren't being used in a 3-way application\n\u003cbr\u003e~Make sure the bulbs in use are marked as dimmable\n\u003cbr\u003e~Adjust the low-end trim dial\n\u003cbr\u003e~Bulb in use may not be compatible with this dimmer. Check Lutron's Compatibility Tool\n\u003cbr\u003e~If the bulb you are using flickers, drops out, or stops dimming when you reach a certain level, you have reached the low end level of the bulb's dimming range\n\u003cbr\u003e~Problem: Bulbs or dimmer buzzes\n\u003cbr\u003e~CFLs and LEDs have electrical components inside them that can make noise when the bulbs are on. The noise is not anything to worry about, but if the noise is bothersome, the best solution is to try a different bulb\n\u003cbr\u003e~Problem: One location will not turn on if the other location is turned off\n\u003cbr\u003e~The common and traveler wires are switched at one of the locations. Consult the installation guide and wiring diagram for wiring guidelines in a 3-way setup. The common wire will be identified as the \"tagged\" wire. This wire either brings line voltage into the wallbox, or delivers voltage to your lights. Traveler wires go between 2 wallboxes and typically \"travel\" together in the wall. If the common and traveler wire are switched on the control, one side will only turn on if the other is in the on position.\n\u003cbr\u003e~Can be used in a 4-way application\n\u003cbr\u003e~In this type of application, 3 switches control the lights (2 of those switches are 3-ways, middle switch is a 4-way)\n\u003cbr\u003e~Dimmer will need to be installed in one of the two 3-way locations, and you'll need to keep switches in the other 3-way and in the 4-way location\n\u003cbr\u003eDVSCCL-153P-BI\n\u003cbr\u003eDVSCCL-153P-BI DIVA CFL\/LED BOXED BISCUIT\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271201636544,"sku":"LU00307","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LU00307lg.jpg?v=1772247870"},{"product_id":"satco-81166","title":"Satco Full Range Black\/Gold Phenolic Plastic Rotary Table Lamp Dimmer Switch","description":"\u003cp\u003eFull Range - Black\/Gold - Phenolic Plastic - | Satco Rotary Table Lamp Dimmer Switch\n\u003cbr\u003eLighting Controls\u003c\/p\u003e\n\n\u003cp\u003e80-1166\n\u003cbr\u003e80-1166\u003c\/p\u003e","brand":"Satco","offers":[{"title":"Default Title","offer_id":47271237353664,"sku":"SA81166","price":12.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/SA81166lg.jpg?v=1772250261"},{"product_id":"satco-81481","title":"Satco Brown Full Range Lamp Cord Rotary Dimmer Switch","description":"\u003cp\u003eBrown - Full Range - Lamp Cord - Rotary | Satco Dimmer Switch\n\u003cbr\u003eLighting Controls\u003c\/p\u003e\n\n\u003cp\u003e80-1481\n\u003cbr\u003eBROWN 200W LAMP CORD ROTARY 80-1481\u003c\/p\u003e","brand":"Satco","offers":[{"title":"Default Title","offer_id":47271237517504,"sku":"SA81481","price":47.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/SA81481lg.jpg?v=1772250282"},{"product_id":"sunlite-55159","title":"Sunlite 120 volt Single-Pole \/ 3-Way White LED Dimmer Switch","description":"\u003cp\u003e120 volt - Single-Pole \/ 3-Way - White | Sunlite LED Dimmer Switch\n\u003cbr\u003eLighting Controls\u003c\/p\u003e\n\n\u003cp\u003e55159-SU\n\u003cbr\u003eDIMMER\/LED\/WH\/0-10V ROCKER SWITCH+SLIDE\u003c\/p\u003e","brand":"Sunlite","offers":[{"title":"Default Title","offer_id":47271315112128,"sku":"SU55159","price":24.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/SU55159lg.jpg?v=1772250666"},{"product_id":"lutron-00369","title":"Lutron 120 volt 150 watt CFL\/LED 600 Watt Incandescents\/Halogens Dimmer","description":"\u003cp\u003e120 volt - 600 Watt Incandescents\/Halogens - 150 watt CFL\/LED - Ivory - 3 Way Switch - Wall Switch - CONTOUR INC - Skylark®  | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~Skylark Contour is the newest addition to the Skylark® slide dimmer family of products. It provides the same quality and performance as the original Skylark slide dimmer, but with an updated look. It features a convenient rocker switch that turns the lights on and off, and an easy-to-use slide control that adjusts the light for any activity\u003c\/p\u003e\n\n\u003cp\u003eCTCL-153P-IV\n\u003cbr\u003eCTCL-153P-IV CONTOUR CFL\/LED IVORY\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271347781824,"sku":"LU00369","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LU00369lg.jpg?v=1772247872"},{"product_id":"lutron-09114","title":"Lutron In-Wall White Smart Dimmer Switch Kit","description":"\u003cp\u003eIn-Wall - White - Smart Bridge - Pico Smart Remote - Caséta | Lutron Smart Dimmer Switch Kit\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~1 Smart Bridge\n\u003cbr\u003e~1 in-wall smart dimmer (not rated for low voltage lighting such as certain track lighting or landscape lighting)\n\u003cbr\u003e~1 Pico Smart Remote with a 10-year typical battery life\n\u003cbr\u003e~1 Claro wallplate\n\u003cbr\u003e~Caseta Wireless\n\u003cbr\u003e~Uses the free Lutron app\n\u003cbr\u003eP-BDG-PKG1W\n\u003cbr\u003eP-BDG-PKG1W BRIDGE KIT WALL DIMMER\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271347814592,"sku":"LU09114","price":114.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LU09114lg.jpg?v=1772247873"},{"product_id":"lutron-19037","title":"Lutron 120 volt Black Toggler 1000 watt Single-Pole Incandescent \/ Halogen Wall Dimmer Switch","description":"\u003cp\u003e120 volt - 1000 watt - Black - Wall Switch - Preset Dimmer - Incandescent \/ Halogen Compatible - Single-Pole - Toggler - Ariadni® | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~On \/ off switch\n\u003cbr\u003e~Slide dimmer\n\u003cbr\u003e~Only works with incandescent and halogen bulbs\n\u003cbr\u003e~Can be installed without a ground connection\n\u003cbr\u003e~Control lights from one location\n\u003cbr\u003e@Troubleshooting\n\u003cbr\u003e~Problem: Lights flicker or do not turn off\n\u003cbr\u003e~Check the bulbs in use are either incandescent or halogen\u003c\/p\u003e\n\n\u003cp\u003eAY-10PH-BL\n\u003cbr\u003eAY-10PH-BL ARIADNI 1000W S-POLE PSET CLAMSHELL BLACK\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271347880128,"sku":"LU19037","price":52.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LU19037lg.jpg?v=1772247871"},{"product_id":"lutron-50779","title":"Lutron 120 volt 1000 Watt Single-Pole \/ 3-Way Dimmer","description":"\u003cp\u003e120 volt - 1000 Watt - Biscuit - Single-Pole \/ 3-Way - Wall Switch - Diva Satin | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~A simple and elegant solution designed to match your existing designer style switches and accessories. Easily turn the lights on and off with the large paddle switch. While the lights are on, use the sleek slide control to adjust the lights to your perfect level. The paddle switch returns the lights to your favorite level. Select models available with built-in soft glow locator light. There are also models available with the eco-dim® feature, which guarantees at least 15% energy savings compared to a standard switch\u003c\/p\u003e\n\n\u003cp\u003eDVSC-103P-BI\n\u003cbr\u003eDVSC-103P-BI DIVA SATIN COLOR 1000W INC 3 WAY BISCUIT\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271349616832,"sku":"LU50779","price":104.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LU50779lg.jpg?v=1772247880"},{"product_id":"task-lighting-514040","title":"Task Lighting Wireless 2 Zone Duo Controller Dimmer Switch","description":"\u003cp\u003eWireless - White - 2 Zone Duo Controller | Task Lighting Wireless Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~Control LED lighting wirelessly\n\u003cbr\u003e~Comes with one CR2032 battery\n\u003cbr\u003e~Attaches to mounting plate with a simple magnet for easy, yet mobile control\n\u003cbr\u003e~Fits perfectly into a standard Decora style switch plate, not included, without the need for cutting into sheet rock\n\u003cbr\u003e~Battery is only consumed while buttons are pressed, meaning years of battery life\n\u003cbr\u003e~Full-range brightness and on\/off control\n\u003cbr\u003e~Single-touch pairing with wireless receiver for easy installation\n\u003cbr\u003e~Control up to two zones of lighting from one wireless controller\n\u003cbr\u003e~Use with WAV Smart Receiver\/Power Supply Combo, WAV Smart Receiver, or 24V Smart Power Supply\n\u003cbr\u003e~T-Q-WR96 receiver or T-Q-WR240 receiver\n\u003cbr\u003eT-Q-2Z-WC-RF-WT\n\u003cbr\u003eT-Q-2Z-WC-RF-WT\u003c\/p\u003e","brand":"Task Lighting","offers":[{"title":"Default Title","offer_id":47271370490048,"sku":"TLP514040","price":76.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/TLP514040lg.jpg?v=1772251450"},{"product_id":"lutron-81093","title":"Lutron 120 volt 600 watt Black Single-Pole Preset Dimmer","description":"\u003cp\u003e120 volt - 600 watt - Black - LED Touch Light Bar - Single-Pole - Sunnata | Lutron Touch Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~Touch or swipe the light bar to set your lights\n\u003cbr\u003e~Soft glow helps you find in the dark\n\u003cbr\u003e~Lights gradually fade on and off\n\u003cbr\u003e~Matching look and feel in multiple locations\n\u003cbr\u003e~MyLevel personalization gives you the ability to customize your Sunnata touch dimmer\u003c\/p\u003e\n\n\u003cp\u003eSTCL-153M-BL\n\u003cbr\u003eSTCL-153M-BL\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271419740352,"sku":"LU81093","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LU81093lg.jpg?v=1772247897"},{"product_id":"lutron-07191","title":"Lutron 0-10 volt 8 amp Brown Single-Pole Ballast \/ Driver Wall Dimmer Switch","description":"\u003cp\u003e0-10 volt - 8 amp - Brown - Wall Switch - Ballast \/ Driver Compatible - Single-Pole - Nova T | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~Control for 0-10 volt LED drivers and ballasts that are compatible with IEC 60929 annex E\n\u003cbr\u003e~Slide to off\n\u003cbr\u003e~Can be used with a wired occupancy sensor tied to the power pack relay\n\u003cbr\u003e@Troubleshooting\n\u003cbr\u003e~Problem: Lights do not dim or remain at low light level\n\u003cbr\u003e~Remove the 0-10 volt (violet\/gray) leads from the control. Lights should go to 100%. If not, check the fixture wiring. Touch the violet\/gray wires together on the ballast\/driver and lights should dim down to low end. If not, follow troubleshooting steps from the ballast\/driver manufacturer\n\u003cbr\u003e~Problem: Light drops out when dimming or turns on to brightest level before reaching the highest level on the dimmer\n\u003cbr\u003e~Adjust low-end or high-end trim according to Installation Instructions\n\u003cbr\u003e~Problem: Lights do not turn off\n\u003cbr\u003e~Make sure the ballast \/ driver line voltage goes through the NTSTV and is not fed with a constant hot feed\u003c\/p\u003e\n\n\u003cp\u003eNTSTV-DV-BR\n\u003cbr\u003eNTSTV-DV-BR NOVA T LINE SW 0-10V CTRL BROWN\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271419871424,"sku":"LX07191","price":125.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LX07191lg.jpg?v=1772247905"},{"product_id":"lutron-09015","title":"Lutron 120 volt Light Almond Toggler 250 watt Single-Pole \/ 3-Way CFL\/LED Wall Dimmer Switch","description":"\u003cp\u003e120 volt - 250 watt - Light Almond - Wall Switch - CFL\/LED Dimmer - Single-Pole \/ 3-Way - Toggler - Ariadni  | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~These Lutron dimmers are designed to replace or match your traditional style switches. Save energy and extend bulb life with the Ariadni's easy-to-use toggle switch and small slide dimmer. Designed with a shallow 1-inch deep back cover for easy installation, Ariadni works with your existing traditional multi-gang wallplates. The Ariadni dimmer is available in single-pole models, where the lights are controlled from one location and 3-way models, where the lights are controlled from more than one location. There are also models available with the eco-dim® feature, which guarantees at least 15% energy savings compared to a standard switch.\u003c\/p\u003e\n\n\u003cp\u003eAYCL-253P-LA\n\u003cbr\u003eAYCL-253P-LA ARIADNI CFL\/LED 250W LIGHT ALMOND\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271419936960,"sku":"LX09015","price":42.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LX09015lg.jpg?v=1772247913"},{"product_id":"lutron-01070","title":"Lutron 120 volt Gray Toggler Single Pole \/ 3-Way LED \/ Incandescent Wall Dimmer Switch","description":"\u003cp\u003e120 volt - Gray - Wall Switch - Dimmer - LED \/ Incandescent Compatible - Single Pole \/ 3-Way - Toggler - Maestro | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~On \/ off switch\n\u003cbr\u003e~Slide dimmer\n\u003cbr\u003e~Dimmer capabilities: adjust high and low end trim, enable\/disable indicator lights, fade on\/off, delayed fade to off time, preset light level\n\u003cbr\u003e~Only 1 dimmer can be used in a 3-way application\n\u003cbr\u003e~Works with most incandescent and halogen bulbs; Lutron recommends if using LED or CFL bulbs to use bulbs listed in their compatibility tool\n\u003cbr\u003e~Does not work with low voltage LEDs\n\u003cbr\u003e~Check Lutron's LED compatibility tool for specific bulb compatibility\n\u003cbr\u003e@Troubleshooting\n\u003cbr\u003e~Problem: CFLs or LEDs do not dim, have a poor dimming range, or they flicker\/flash\n\u003cbr\u003e~If using in a 3-way application, check that only one master dimmer is being used. The other location must be a mechanical switch or a Lutron companion dimmer\n\u003cbr\u003e~Make sure the bulbs in use are marked as dimmable\n\u003cbr\u003e~Adjust the low-end trim by holding the lower rocker and tapswitch together for 5-6 seconds. When the LED on the dimmer goes out and then starts blinking, release and adjust the low end trim until the bulbs become stable\n\u003cbr\u003e~If the bulb you are using flickers, drops out, or stops dimming when you reach a certain level, you have reached the low end level of the bulb's dimming range\n\u003cbr\u003e~Problem: Bulbs or dimmer buzzes\n\u003cbr\u003e~CFLs and LEDs have electrical components inside them that can make noise when the bulbs are on. The noise is not anything to worry about, but if the noise is bothersome, the best solution is to try a different bulb\n\u003cbr\u003e~Problem: Dimmer is not working in a 3-way application when used with a 3-way mechanical switch\n\u003cbr\u003e~Make sure the mechanical switch has been properly rewired and the dimmer reprogrammed as per instructions 6A and 9 in the installation instructions\n\u003cbr\u003e~Can work with a standard mechanical switch in a 3-way application. The switch will need to be rewired as well as reprogram the dimmer (as shown by installation instructions)\n\u003cbr\u003e~In a 4-way application companion dimmer model MA-R or MSC-AD must be used (mechanical switches will not work)\n\u003cbr\u003e~In a 4-way application, 2 wires will be connected to the blue screw terminal. These will be the wires that are tied to the blue screws on the other two dimmers\n\u003cbr\u003e~In order to dim from multiple locations, you will need 1 MACL-153M and 1 companion dimmer (MA-R or MSC-AD)\n\u003cbr\u003e~Dimmer does not require a neutral connection\n\u003cbr\u003eMACL-153M-GR\n\u003cbr\u003eMACL-153M-GR MAESTRO C.L MULTILOC ED BOX GRAY\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271446839488,"sku":"LX01070","price":35.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LX01070lg.jpg?v=1772247901"},{"product_id":"lutron-03894","title":"Lutron 0-10 volt 8 amp Beige Single-Pole Ballast \/ Driver Wall Dimmer Switch","description":"\u003cp\u003e0-10 volt - 8 amp - Beige - Wall Switch - Ballast \/ Driver Compatible - Single-Pole - Nova T | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~Control for 0-10 volt LED drivers and ballasts that are compatible with IEC 60929 annex E\n\u003cbr\u003e~Slide to off\n\u003cbr\u003e~Can be used with a wired occupancy sensor tied to the power pack relay\n\u003cbr\u003e@Troubleshooting\n\u003cbr\u003e~Problem: Lights do not dim or remain at low light level\n\u003cbr\u003e~Remove the 0-10 volt (violet\/gray) leads from the control. Lights should go to 100%. If not, check the fixture wiring. Touch the violet\/gray wires together on the ballast\/driver and lights should dim down to low end. If not, follow troubleshooting steps from the ballast\/driver manufacturer\n\u003cbr\u003e~Problem: Light drops out when dimming or turns on to brightest level before reaching the highest level on the dimmer\n\u003cbr\u003e~Adjust low-end or high-end trim according to Installation Instructions\n\u003cbr\u003e~Problem: Lights do not turn off\n\u003cbr\u003e~Make sure the ballast \/ driver line voltage goes through the NTSTV and is not fed with a constant hot feed\u003c\/p\u003e\n\n\u003cp\u003eNTSTV-DV-BE\n\u003cbr\u003eNTSTV-DV-BE NOVA T LINE SW 0-10V CTRL BEIGE\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271446872256,"sku":"LX03894","price":125.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LX03894lg.jpg?v=1772247908"},{"product_id":"lutron-09960","title":"Lutron 0-10 volt 8 amp Ivory Single-Pole \/ 3-Way Ballast \/ Driver Wall Dimmer Switch","description":"\u003cp\u003e0-10 volt - 8 amp - Ivory - Wall Switch - Ballast \/ Driver Compatible - Single-Pole \/ 3-Way - Diva | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~Control for 0-10 volt LED drivers and fluorescent ballasts\n\u003cbr\u003e~Connects directly to the line voltage to switch on\/off, so a power pack is not needed\n\u003cbr\u003e~Cannot be used with a wired occupancy sensor\n\u003cbr\u003e@Troubleshooting\n\u003cbr\u003e~Problem: Lights do not dim or remain at low light level\n\u003cbr\u003e~Remove the 0-10 volt (violet\/gray) leads from the control. Lights should go to 100%. If not, check the fixture wiring. Touch the violet\/gray wires together on the ballast\/driver and lights should dim down to low end. If not, follow troubleshooting steps from the ballast\/driver manufacturer\n\u003cbr\u003e~Problem: Light drops out when dimming or turns on to brightest level before reaching the highest level on the dimmer\n\u003cbr\u003e~Adjust low-end or high-end trim according to Installation Instructions\n\u003cbr\u003e~Problem: Lights do not turn off\n\u003cbr\u003e~Make sure ballast\/driver line voltage goes through the switch and is not fed with a constant hot feed\u003c\/p\u003e\n\n\u003cp\u003eDVSTV-IV\n\u003cbr\u003eDVSTV-IV DIVA 0-10 W\/SWITCHING BOX IVORY\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271446970560,"sku":"LX09960","price":78.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LX09960lg.jpg?v=1772247910"},{"product_id":"lutron-66357","title":"Lutron 0-10 volt 16 amp Taupe Single-Pole Ballast \/ Driver Wall Dimmer Switch","description":"\u003cp\u003e0-10 volt - 16 amp - Taupe - Wall Switch - Ballast \/ Driver Compatible - Single-Pole - Diva | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~Control for 0-10 volt LED drivers and fluorescent ballasts\n\u003cbr\u003e~Must be used with a power pack relay model\n\u003cbr\u003e~Cannot be used with a wired occupancy sensor\n\u003cbr\u003e@Troubleshooting\n\u003cbr\u003e~Problem: Lights do not dim or remain at low light level\n\u003cbr\u003e~Remove the 0-10 volt (violet\/gray) leads from the control. Lights should go to 100%. If not, check the fixture wiring. Touch the violet\/gray wires together on the ballast\/driver and lights should dim down to low end. If not, follow troubleshooting steps from the ballast\/driver manufacturer\n\u003cbr\u003e~Problem: Light drops out when dimming or turns on to brightest level before reaching the highest level on the dimmer\n\u003cbr\u003e~Adjust low-end or high-end trim according to Installation Instructions\n\u003cbr\u003e~Problem: Lights do not turn on\n\u003cbr\u003e~Make sure you are using this with PP-DV power pack\n\u003cbr\u003e~Must be used with a power pack model PP-DV or PP-347H\n\u003cbr\u003eDVSCTV-TP\n\u003cbr\u003eDVSCTV-TP DIVA 0-10V CLASS 2 TAUPE\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271449362624,"sku":"LU66357","price":90.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LU66357lg.jpg?v=1772247889"},{"product_id":"lutron-10897","title":"Lutron 120 volt Sienna Single Pole LED \/ Incandescent Wall Dimmer Switch","description":"\u003cp\u003e120 volt - Sienna - Wall Switch - Dimmer - LED \/ Incandescent Compatible - Single Pole - Nova T | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~Slide-to-off dimmer\n\u003cbr\u003e~Works with most LED, CFL, incandescent and halogen bulbs\n\u003cbr\u003e~Check Lutron's LED compatibility tool for specific bulb compatibility\n\u003cbr\u003e~Also works with 400 watt Lutron Hi-Lume 'LTE' drivers (maximum of 10 drivers)\n\u003cbr\u003e@Troubleshooting\n\u003cbr\u003e~Problem: CFLs or LEDs do not dim, have a poor dimming range, or they flicker\/flash\n\u003cbr\u003e~Make sure the bulbs in use are marked as dimmable\n\u003cbr\u003e~Adjust the low-end trim dial\n\u003cbr\u003e~Bulb in use may not be compatible with this dimmer. Check Lutron's Compatibility Tool\n\u003cbr\u003e~If the bulb you are using flickers, drops out, or stops dimming when you reach a certain level, you have reached the low end level of the bulb's dimming range\n\u003cbr\u003e~Problem: Bulbs or dimmer is buzzing\n\u003cbr\u003e~CFLs and LEDs have electrical components inside them that can make noise when the bulbs are on. The noise is not anything to worry about, but if the noise is bothersome, the best solution is to try a different bulb\u003c\/p\u003e\n\n\u003cp\u003eNTCL-250-SI\n\u003cbr\u003eNTCL-250-SI NOVAT 250W CFL\/LED 1000W INC SI\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271449854144,"sku":"LX10897","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LX10897lg.jpg?v=1772247913"},{"product_id":"westek-491157","title":"Westek Indoor Screw-In White Touch Dimmer","description":"\u003cp\u003eIndoor - 3-Level - Screw-In - White | Westek Touch Dimmer\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~Simple screw-in design\n\u003cbr\u003e~For incandescent bulbs only\n\u003cbr\u003e~150W max upward bulb, 100W max downward bulb\u003c\/p\u003e\n\n\u003cp\u003e6603BC\n\u003cbr\u003e150W SCREW-IN TOUCH DIMMER 6\/CC (6603BC)\u003c\/p\u003e","brand":"Westek","offers":[{"title":"Default Title","offer_id":47271493140672,"sku":"WH491157","price":12.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/WH491157lg.jpg?v=1772254232"},{"product_id":"satco-lighting-91069","title":"Satco 500 watt Slide White Floor Lamp Dimmer","description":"\u003cp\u003e500 watt - Slide - White | Satco Floor Lamp Dimmer\n\u003cbr\u003eLighting Controls\u003c\/p\u003e\n\n\u003cp\u003e90-1069\n\u003cbr\u003eFLOOR LAMP DIMMER 500W-120V 4.3A WHITE 7'\u003c\/p\u003e","brand":"Satco","offers":[{"title":"Default Title","offer_id":47271576076480,"sku":"SA91069","price":34.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/SA91069lg.jpg?v=1772250413"},{"product_id":"lutron-10256","title":"Lutron Plug-In White LED \/ Incandescent Smart Plug Dimmer Kit","description":"\u003cp\u003e2 Plug-In Lamp Dimmers - Smart Bridge - 2 Pico Smart Remotes - 2 Tabletop Pedestals - White - Caséta | Lutron Smart Plug Lamp Dimmer Kit\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~Compatible with LED, CFL, incandescent, and halogen bulbs\n\u003cbr\u003e~1 Smart Bridge\n\u003cbr\u003e~2 plug-in smart dimmers, each controls up to 2 lamps\n\u003cbr\u003e~2 Pico Smart Remotes with a 10-year typical battery life\n\u003cbr\u003e~2 tabletop pedestals for Pico\n\u003cbr\u003e~Works with the free Lutron app\n\u003cbr\u003e~Caseta Wireless\n\u003cbr\u003e~Uses the free Lutron app\n\u003cbr\u003eP-BDG-PKG2P\n\u003cbr\u003eP-BDG-PKG2P CASETA BRIDGE KIT 2 PID\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271646331072,"sku":"LU10256","price":214.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LU10256lg.jpg?v=1772247871"},{"product_id":"lutron-82596","title":"Lutron 120 volt Light Almond Toggler 150 watt Single-Pole \/ 3-Way CFL\/LED Wall Dimmer Switch","description":"\u003cp\u003e120 volt - 150 watt - Light Almond - Wall Switch - CFL\/LED Dimmer - Single-Pole \/ 3-Way - Toggler - Ariadni  | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~These Lutron dimmers are designed to replace or match your traditional style switches. Save energy and extend bulb life with the Ariadni's easy-to-use toggle switch and small slide dimmer. Designed with a shallow 1-inch deep back cover for easy installation, Ariadni works with your existing traditional multi-gang wallplates. The Ariadni dimmer is available in single-pole models, where the lights are controlled from one location and 3-way models, where the lights are controlled from more than one location. There are also models available with the eco-dim® feature, which guarantees at least 15% energy savings compared to a standard switch.\u003c\/p\u003e\n\n\u003cp\u003eAYCL-153P-LA\n\u003cbr\u003eAYCL-153P-LA ARIADNI CFL\/LED DIMMER LIGHT ALMOND BOXED\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271648067776,"sku":"LU82596","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LU82596lg.jpg?v=1772247894"},{"product_id":"lutron-00893","title":"Lutron 120 volt White Single Pole \/ 3-Way LED \/ Incandescent Wall Dimmer Switch","description":"\u003cp\u003e120 volt - White - Wall Switch - Dimmer - LED \/ Incandescent Compatible - Single Pole \/ 3-Way - Skylark | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~On \/ off switch\n\u003cbr\u003e~Slide dimmer\n\u003cbr\u003e~Works with most LED, CFL, incandescent and halogen bulbs\n\u003cbr\u003e~Check Lutron's LED compatibility tool for specific bulb compatibility\n\u003cbr\u003e@Troubleshooting\n\u003cbr\u003e~Problem: CFLs or LEDs do not dim, have a poor dimming range, or they flicker\/flash\n\u003cbr\u003e~Check that two dimmers aren't being used in a 3-way application\n\u003cbr\u003e~Make sure the bulbs in use are marked as dimmable\n\u003cbr\u003e~Adjust the low-end trim dial\n\u003cbr\u003e~Bulb in use may not be compatible with this dimmer. Check Lutron's Compatibility Tool\n\u003cbr\u003e~If the bulb you are using flickers, drops out, or stops dimming when you reach a certain level, you have reached the low end level of the bulb's dimming range\n\u003cbr\u003e~CFLs and LEDs have electrical components inside them that can make noise when the bulbs are on. The noise is not anything to worry about, but if the noise is bothersome, the best solution is to try a different bulb\n\u003cbr\u003e~Problem: One location will not turn on if the other location is turned off\n\u003cbr\u003e~The common and traveler wires are switched at one of the locations. Consult the installation guide and wiring diagram for wiring guidelines in a 3-way setup. The common wire will be identified as the \"tagged\" wire. This wire either brings line voltage into the wallbox, or delivers voltage to your lights. Traveler wires go between 2 wallboxes and typically \"travel\" together in the wall. If the common and traveler wire are switched on the control, one side will only turn on if the other is in the on position.\n\u003cbr\u003e~Use one dimmer in a 3-way application. In the other location use a standard mechanical switch, such as model CA-3PS\n\u003cbr\u003e~Can be used in a 4-way application\n\u003cbr\u003e~In this type of application, three switches control the lights (two of those switches are 3-ways, middle switch is a 4-way). Dimmer will need to be installed in one of the two 3-way locations, and you'll need to keep switches in the other 3-way and in the 4-way location\n\u003cbr\u003eSCL-153P-WH\n\u003cbr\u003eSCL-153P-WH SKYLARK CFL\/LED DIMMER WHITE BOXED\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271648264384,"sku":"LX00893","price":24.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LX00893lg.jpg?v=1772247903"},{"product_id":"lutron-09956","title":"Lutron 0-10 volt 8 amp Almond Single-Pole \/ 3-Way Ballast \/ Driver Wall Dimmer Switch","description":"\u003cp\u003e0-10 volt - 8 amp - Almond - Wall Switch - Ballast \/ Driver Compatible - Single-Pole \/ 3-Way - Diva | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~Control for 0-10 volt LED drivers and fluorescent ballasts\n\u003cbr\u003e~Connects directly to the line voltage to switch on\/off, so a power pack is not needed\n\u003cbr\u003e~Cannot be used with a wired occupancy sensor\n\u003cbr\u003e@Troubleshooting\n\u003cbr\u003e~Problem: Lights do not dim or remain at low light level\n\u003cbr\u003e~Remove the 0-10 volt (violet\/gray) leads from the control. Lights should go to 100%. If not, check the fixture wiring. Touch the violet\/gray wires together on the ballast\/driver and lights should dim down to low end. If not, follow troubleshooting steps from the ballast\/driver manufacturer\n\u003cbr\u003e~Problem: Light drops out when dimming or turns on to brightest level before reaching the highest level on the dimmer\n\u003cbr\u003e~Adjust low-end or high-end trim according to Installation Instructions\n\u003cbr\u003e~Problem: Lights do not turn off\n\u003cbr\u003e~Make sure ballast\/driver line voltage goes through the switch and is not fed with a constant hot feed\u003c\/p\u003e\n\n\u003cp\u003eDVSTV-AL\n\u003cbr\u003eDVSTV-AL DIVA 0-10 W\/SWITCHING BOX ALMOND\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271648329920,"sku":"LX09956","price":78.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LX09956lg.jpg?v=1772247907"},{"product_id":"lutron-09197","title":"Lutron 120 volt 250 watt Single-Pole or 3-Way CFL\/LED Preset Dimmer","description":"\u003cp\u003e120 volt - 250 watt - White - Wall Switch - Single-Pole or 3-Way -CFL\/LED - Diva  | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~A simple and elegant solution designed to match your existing designer style switches and accessories. Easily turn the lights on and off with the large paddle switch. While the lights are on, use the sleek slide control to adjust the lights to your perfect level. The paddle switch returns the lights to your favorite level. Select models available with built-in soft glow locator light. There are also models available with the eco-dim® feature, which guarantees at least 15% energy savings compared to a standard switch.\n\u003cbr\u003e~250W for Dimmable CFL\/LED bulbs 600W for Incandescents\/Halogens\u003c\/p\u003e\n\n\u003cp\u003eDVCL-253P-WH\n\u003cbr\u003eDVCL-253P-WH DIVA CFL\/LED BOX 250W WHITE\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271704297664,"sku":"LX09197","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LX09197lg.jpg?v=1772247906"},{"product_id":"lutron-00304","title":"Lutron 120 volt 150 watt Single-Pole or 3-Way CFL\/LED Preset Dimmer","description":"\u003cp\u003e120 volt - 150 watt - Light Almond - Wall Switch - Single-Pole or 3-Way -CFL\/LED - Diva  | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~A simple and elegant solution designed to match your existing designer style switches and accessories. Easily turn the lights on and off with the large paddle switch. While the lights are on, use the sleek slide control to adjust the lights to your perfect level. The paddle switch returns the lights to your favorite level. Select models available with built-in soft glow locator light. There are also models available with the eco-dim® feature, which guarantees at least 15% energy savings compared to a standard switch.\n\u003cbr\u003e~150W for Dimmable CFL\/LED bulbs 600W for Incandescents\/Halogens\u003c\/p\u003e\n\n\u003cp\u003eDVCL-153P-LA\n\u003cbr\u003eDVCL-153P-LA DIVA CFL\/LED BOXED LIGHT ALMOND\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271706886336,"sku":"LU00304","price":28.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LU00304lg.jpg?v=1772247865"},{"product_id":"lutron-21769","title":"Lutron In-Wall White Smart Dimmer Switch","description":"\u003cp\u003eIn-Wall - White - Caséta - Dimmer - Status LED | Lutron Smart Dimmer Switch\n\u003cbr\u003eLighting Controls\u003c\/p\u003e\n\n\u003cp\u003e~Caseta Wireless\n\u003cbr\u003e~Uses the free Lutron app\n\u003cbr\u003ePD-5NE-WH\n\u003cbr\u003eCASETA 500W ELV MULT W\/NTRL\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271707082944,"sku":"LU21769","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LU21769lg.jpg?v=1772247873"},{"product_id":"satco-lighting-90821","title":"Satco 200 watt Hi-Low Brown Dimmer","description":"\u003cp\u003e200 watt - Hi-Low - Brown | Satco Dimmer\n\u003cbr\u003eLighting Controls\u003c\/p\u003e\n\n\u003cp\u003e90-821\n\u003cbr\u003e200W HI-LOW DIMMER FOR 18\/2 SPT-2 200W 120V BROWN FINISH\u003c\/p\u003e","brand":"Satco","offers":[{"title":"Default Title","offer_id":47271781597376,"sku":"SA90821","price":3.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/SA90821lg.jpg?v=1772250399"},{"product_id":"lutron-82604","title":"Lutron 120 volt Ivory Toggler Single-Pole \/ 3-Way LED \/ Incandescent Wall Dimmer Switch","description":"\u003cp\u003e120 volt - Ivory - Wall Switch - Preset Dimmer - LED \/ Incandescent Compatible - Single-Pole \/ 3-Way - Toggler - Ariadni® | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~On \/ off switch\n\u003cbr\u003e~Slide dimmer\n\u003cbr\u003e~Only 1 dimmer can be used in a 3-way application\n\u003cbr\u003e~Dim from one, switch from other locations\n\u003cbr\u003e~Works with most LED, CFL, incandescent and halogen bulbs\n\u003cbr\u003e~Check Lutron's LED compatibility tool for specific bulb compatibility\n\u003cbr\u003e@Troubleshooting\n\u003cbr\u003e~Problem: Switch works in reverse in a single pole application\n\u003cbr\u003e~Do you have wires on a copper and a brass-colored screw? If so, remove the wire from the brass-colored screw and tie it onto the other brass-colored screw on the opposite side of the dimmer\n\u003cbr\u003e~Check the switch is not installed upside down\n\u003cbr\u003e~Problem: CFLs or LEDs do not dim, have a poor dimming range, or they flicker\/flash\n\u003cbr\u003e~Check that 2 dimmers aren't being used in a 3-way application\n\u003cbr\u003e~Make sure the bulbs in use are marked as dimmable\n\u003cbr\u003e~Adjust the low-end trim dial\n\u003cbr\u003e~Bulb in use may not be compatible with this dimmer. Check Lutron's Compatibility Tool\n\u003cbr\u003e~If the bulb you are using flickers, drops out, or stops dimming when you reach a certain level, you have reached the low end level of the bulb's dimming range\n\u003cbr\u003e~Problem: Bulbs or dimmer buzzes\n\u003cbr\u003e~CFLs and LEDs have electrical components inside them that can make noise when the bulbs are on. The noise is not anything to worry about, but if the noise is bothersome, the best solution is to try a different bulb\n\u003cbr\u003e~Problem: One location will not turn on if the other location is turned off\n\u003cbr\u003e~The common and traveler wires are switched at one of the locations. Consult the installation guide and wiring diagram for wiring guidelines in a 3-way setup. The common wire will be identified as the \"tagged\" wire. This wire either brings line voltage into the wallbox, or delivers voltage to your lights. Traveler wires go between 2 wallboxes and typically \"travel\" together in the wall. If the common and traveler wire are switched on the control, one side will only turn on if the other is in the on position.\n\u003cbr\u003e~In a single pole application use the bottom 2 screws on the unit that sit across from each other\n\u003cbr\u003e@4-Way Application\n\u003cbr\u003e~Can be used in a 4-way application\n\u003cbr\u003e~In this type of application, 3 switches control the lights (2 of those switches are 3-ways, middle switch is a 4-way)\n\u003cbr\u003e~Dimmer will need to be installed in one of the two 3-way locations, and you'll need to keep switches in the other 3-way and in the 4-way location\n\u003cbr\u003eAYCL-153PH-IV\n\u003cbr\u003eAYCL-153PH-IV ARIADNI CFL\/LED DIMMER IVORY CLAM\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271790739648,"sku":"LU82604","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LU82604lg.jpg?v=1772247897"},{"product_id":"lutron-07192","title":"Lutron 0-10 volt 8 amp Gray Single-Pole Ballast \/ Driver Wall Dimmer Switch","description":"\u003cp\u003e0-10 volt - 8 amp - Gray - Wall Switch - Ballast \/ Driver Compatible - Single-Pole - Nova T | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~Control for 0-10 volt LED drivers and ballasts that are compatible with IEC 60929 annex E\n\u003cbr\u003e~Slide to off\n\u003cbr\u003e~Can be used with a wired occupancy sensor tied to the power pack relay\n\u003cbr\u003e@Troubleshooting\n\u003cbr\u003e~Problem: Lights do not dim or remain at low light level\n\u003cbr\u003e~Remove the 0-10 volt (violet\/gray) leads from the control. Lights should go to 100%. If not, check the fixture wiring. Touch the violet\/gray wires together on the ballast\/driver and lights should dim down to low end. If not, follow troubleshooting steps from the ballast\/driver manufacturer\n\u003cbr\u003e~Problem: Light drops out when dimming or turns on to brightest level before reaching the highest level on the dimmer\n\u003cbr\u003e~Adjust low-end or high-end trim according to Installation Instructions\n\u003cbr\u003e~Problem: Lights do not turn off\n\u003cbr\u003e~Make sure the ballast \/ driver line voltage goes through the NTSTV and is not fed with a constant hot feed\u003c\/p\u003e\n\n\u003cp\u003eNTSTV-DV-GR\n\u003cbr\u003eNTSTV-DV-GR NOVA T LINE SW 0-10V CTRL GREY\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271790969024,"sku":"LX07192","price":125.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LX07192lg.jpg?v=1772247905"},{"product_id":"lutron-07195","title":"Lutron 0-10 volt 8 amp Sienna Single-Pole Ballast \/ Driver Wall Dimmer Switch","description":"\u003cp\u003e0-10 volt - 8 amp - Sienna - Wall Switch - Ballast \/ Driver Compatible - Single-Pole - Nova T | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~Control for 0-10 volt LED drivers and ballasts that are compatible with IEC 60929 annex E\n\u003cbr\u003e~Slide to off\n\u003cbr\u003e~Can be used with a wired occupancy sensor tied to the power pack relay\n\u003cbr\u003e@Troubleshooting\n\u003cbr\u003e~Problem: Lights do not dim or remain at low light level\n\u003cbr\u003e~Remove the 0-10 volt (violet\/gray) leads from the control. Lights should go to 100%. If not, check the fixture wiring. Touch the violet\/gray wires together on the ballast\/driver and lights should dim down to low end. If not, follow troubleshooting steps from the ballast\/driver manufacturer\n\u003cbr\u003e~Problem: Light drops out when dimming or turns on to brightest level before reaching the highest level on the dimmer\n\u003cbr\u003e~Adjust low-end or high-end trim according to Installation Instructions\n\u003cbr\u003e~Problem: Lights do not turn off\n\u003cbr\u003e~Make sure the ballast \/ driver line voltage goes through the NTSTV and is not fed with a constant hot feed\u003c\/p\u003e\n\n\u003cp\u003eNTSTV-DV-SI\n\u003cbr\u003eNTSTV-DV-SI NOVA T LINE SW 0-10V CTRL SIENNA\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271791001792,"sku":"LX07195","price":125.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LX07195lg.jpg?v=1772247903"},{"product_id":"lutron-00302","title":"Lutron 120 volt 150 watt Single-Pole or 3-Way CFL\/LED Preset Dimmer","description":"\u003cp\u003e120 volt - 150 watt - Gray - Wall Switch - Single-Pole or 3-Way -CFL\/LED - Diva  | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~A simple and elegant solution designed to match your existing designer style switches and accessories. Easily turn the lights on and off with the large paddle switch. While the lights are on, use the sleek slide control to adjust the lights to your perfect level. The paddle switch returns the lights to your favorite level. Select models available with built-in soft glow locator light. There are also models available with the eco-dim® feature, which guarantees at least 15% energy savings compared to a standard switch.\n\u003cbr\u003e~150W for Dimmable CFL\/LED bulbs 600W for Incandescents\/Halogens\u003c\/p\u003e\n\n\u003cp\u003eDVCL-153P-GR\n\u003cbr\u003eDVCL-153P-GR DIVA CFL\/LED BOXED GRAY\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271793852608,"sku":"LU00302","price":28.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LU00302lg.jpg?v=1772247869"},{"product_id":"lutron-50710","title":"Lutron 120 volt Light Almond Toggler 600 watt Single-Pole Incandescent \/ Halogen Wall Dimmer Switch","description":"\u003cp\u003e120 volt - 600 watt - Light Almond - Wall Switch - Preset Dimmer - Incandescent \/ Halogen Compatible - Single-Pole - Toggler - Diva® | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~On \/ off switch\n\u003cbr\u003e~Slide dimmer\n\u003cbr\u003e~Can be installed without a ground connection\n\u003cbr\u003e~Control lights from one location\n\u003cbr\u003e~Only works with incandescent and halogen bulbs\n\u003cbr\u003e@Troubleshooting\n\u003cbr\u003e~Problem: Lights flicker or do not turn off\n\u003cbr\u003e~Check the bulbs in use are either incandescent or halogen\u003c\/p\u003e\n\n\u003cp\u003e50710\n\u003cbr\u003eDV-600PH-LA DIVA 600WATT PRESET CLAMSHELL LIGHT ALMOND\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271794311360,"sku":"LU50710","price":29.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LU50710lg.jpg?v=1772247881"},{"product_id":"lutron-66352","title":"Lutron 0-10 volt 16 amp Hot Red Single-Pole Ballast \/ Driver Wall Dimmer Switch","description":"\u003cp\u003e0-10 volt - 16 amp - Hot Red - Wall Switch - Ballast \/ Driver Compatible - Single-Pole - Diva | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~Control for 0-10 volt LED drivers and fluorescent ballasts\n\u003cbr\u003e~Must be used with a power pack relay model\n\u003cbr\u003e~Cannot be used with a wired occupancy sensor\n\u003cbr\u003e@Troubleshooting\n\u003cbr\u003e~Problem: Lights do not dim or remain at low light level\n\u003cbr\u003e~Remove the 0-10 volt (violet\/gray) leads from the control. Lights should go to 100%. If not, check the fixture wiring. Touch the violet\/gray wires together on the ballast\/driver and lights should dim down to low end. If not, follow troubleshooting steps from the ballast\/driver manufacturer\n\u003cbr\u003e~Problem: Light drops out when dimming or turns on to brightest level before reaching the highest level on the dimmer\n\u003cbr\u003e~Adjust low-end or high-end trim according to Installation Instructions\n\u003cbr\u003e~Problem: Lights do not turn on\n\u003cbr\u003e~Make sure you are using this with PP-DV power pack\n\u003cbr\u003e~Must be used with a power pack model PP-DV or PP-347H\n\u003cbr\u003eDVSCTV-HT\n\u003cbr\u003eDVSCTV-HT DIVA 0-10V CLASS 2 HOT\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271794573504,"sku":"LU66352","price":90.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LU66352lg.jpg?v=1772247884"},{"product_id":"enerlites-14153","title":"Enerlites White Single-Pole \/ 3-Way Dimmer Light Switch","description":"\u003cp\u003eWhite Finish - Single-Pole \/ 3-Way - for CFL\/LED Lights, Incandescent\/Halogen | Enerlites Wall Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~Provides wider dimming range for dimmable LED and CFL bulbs than standard incandescent dimmers\n\u003cbr\u003e~ELV compatible\n\u003cbr\u003e~Suitable for multi-gang installations\n\u003cbr\u003e~Dim lighting for increased energy savings\n\u003cbr\u003e~Designed for compatibility with most high efficiency light bulbs\n\u003cbr\u003e~Equipped with LED indicator\u003c\/p\u003e\n\n\u003cp\u003e57300-W\n\u003cbr\u003e57300-W\u003c\/p\u003e","brand":"Enerlites","offers":[{"title":"Default Title","offer_id":47271838318784,"sku":"ENE14153","price":23.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/ENE14153lg.jpg?v=1772246222"},{"product_id":"lutron-13592","title":"Lutron 120 volt White Toggler 300 watt Single-Pole Incandescent \/ Halogen Wall Electronic Dimmer Switch","description":"\u003cp\u003e120 volt - 300 watt - White - Wall Switch - Preset Dimmer - Incandescent \/ Halogen Compatible - Single-Pole - Toggler - Electronic - Diva® | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~On \/ off switch\n\u003cbr\u003e~Slide dimmer\n\u003cbr\u003e~Requires a neutral connection\n\u003cbr\u003e~Control lights from one location\n\u003cbr\u003e~Only works with incandescent and halogen bulbs\n\u003cbr\u003e@Troubleshooting\n\u003cbr\u003e~Problem: Lights flicker or do not turn off\n\u003cbr\u003e~Check the bulbs in use are on an electronic (not a magnetic) transformer\u003c\/p\u003e\n\n\u003cp\u003eDVELV-300PH-WH\n\u003cbr\u003eDVELV-300PH-WH DIVA ELEC LOW VOLT 300W S-POLE WHITE CLAMSHELL\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271899103424,"sku":"LU13592","price":115.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LU13592lg.jpg?v=1772247872"},{"product_id":"lutron-00894","title":"Lutron 120 volt Almond Single Pole \/ 3-Way LED \/ Incandescent Wall Dimmer Switch","description":"\u003cp\u003e120 volt - Almond - Wall Switch - Dimmer - LED \/ Incandescent Compatible - Single Pole \/ 3-Way - Skylark | Lutron Dimmer Switch\n\u003cbr\u003eLighting Controls\n\u003cbr\u003e~On \/ off switch\n\u003cbr\u003e~Slide dimmer\n\u003cbr\u003e~Works with most LED, CFL, incandescent and halogen bulbs\n\u003cbr\u003e~Check Lutron's LED compatibility tool for specific bulb compatibility\n\u003cbr\u003e@Troubleshooting\n\u003cbr\u003e~Problem: CFLs or LEDs do not dim, have a poor dimming range, or they flicker\/flash\n\u003cbr\u003e~Check that two dimmers aren't being used in a 3-way application\n\u003cbr\u003e~Make sure the bulbs in use are marked as dimmable\n\u003cbr\u003e~Adjust the low-end trim dial\n\u003cbr\u003e~Bulb in use may not be compatible with this dimmer. Check Lutron's Compatibility Tool\n\u003cbr\u003e~If the bulb you are using flickers, drops out, or stops dimming when you reach a certain level, you have reached the low end level of the bulb's dimming range\n\u003cbr\u003e~Problem: Bulbs or dimmer is buzzing\n\u003cbr\u003e~CFLs and LEDs have electrical components inside them that can make noise when the bulbs are on. The noise is not anything to worry about, but if the noise is bothersome, the best solution is to try a different bulb\n\u003cbr\u003e~Problem: One location will not turn on if the other location is turned off\n\u003cbr\u003e~The common and traveler wires are switched at one of the locations. Consult the installation guide and wiring diagram for wiring guidelines in a 3-way setup. The common wire will be identified as the \"tagged\" wire. This wire either brings line voltage into the wallbox, or delivers voltage to your lights. Traveler wires go between 2 wallboxes and typically \"travel\" together in the wall. If the common and traveler wire are switched on the control, one side will only turn on if the other is in the on position.\n\u003cbr\u003e~Use one dimmer in a 3-way application. In the other location use a standard mechanical switch, such as model CA-3PS\n\u003cbr\u003e~Can be used in a 4-way application\n\u003cbr\u003e~In this type of application, three switches control the lights (two of those switches are 3-ways, middle switch is a 4-way). Dimmer will need to be installed in one of the two 3-way locations, and you'll need to keep switches in the other 3-way and in the 4-way location\n\u003cbr\u003eSCL-153P-AL\n\u003cbr\u003eSCL-153P-AL SKYLARK CFL\/LED DIMMER ALMOND BOXED\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":47271900152000,"sku":"LX00894","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/LX00894lg.jpg?v=1772247902"},{"product_id":"satco-82701","title":"Satco Black Full Range In-line Slide Dimmer Switch","description":"\u003cp\u003eBlack - Full Range - In-Line - Slide | Satco LED Dimmer Switch\n\u003cbr\u003eLighting Controls\u003c\/p\u003e\n\n\u003cp\u003e80-2701\n\u003cbr\u003e80-2701  Full Range In-line LED Dimmer, Black Finish\u003c\/p\u003e","brand":"Satco","offers":[{"title":"Default Title","offer_id":47271903330496,"sku":"SA82701","price":26.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/files\/SA82701lg.jpg?v=1772250337"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/9893\/1136\/collections\/FE72212lg.jpg?v=1782226289","url":"https:\/\/www.lightbulbs.com\/collections\/dimmer-switches.oembed","provider":"LightBulbs.com","version":"1.0","type":"link"}